Brabura 32 Stainless Steel Griddle
Our 32” griddle has over 500 square inches of cooking area, giving you lots of options when it comes to delighting your crowd. The griddle surface is made from 10mm 304 stainless steel. The thick steel holds more heat than thinner stainless steel griddles for professional performance.
The Brabura 32 stainless steel griddle includes:
Griddle for built-in or counter top installation
10mm stainless steel cooking surface
Removable stainless steel cover
Fabric weather cover
Our 32” griddle has over 500 square inches of cooking area, giving you lots of options when it comes to delighting your crowd. The griddle surface is made from 10mm 304 stainless steel. The thick steel holds more heat than thinner stainless steel griddles for professional performance.
The Brabura 32 stainless steel griddle includes:
Griddle for built-in or counter top installation
10mm stainless steel cooking surface
Removable stainless steel cover
Fabric weather cover
Our 32” griddle has over 500 square inches of cooking area, giving you lots of options when it comes to delighting your crowd. The griddle surface is made from 10mm 304 stainless steel. The thick steel holds more heat than thinner stainless steel griddles for professional performance.
The Brabura 32 stainless steel griddle includes:
Griddle for built-in or counter top installation
10mm stainless steel cooking surface
Removable stainless steel cover
Fabric weather cover
-
Griddle surface dimensions: 29” x 17½”
Griddle area: 508 sq in
Burger count: 22
Fuel type: LP
Fuel conversion to NG: Kit Included
Number of burners: 3
BTUs per burner: 9,000 BTUs
Total surface BTUs: 27,000 BTUs
Ignition type: Continuous Spark
Control knobs: LED-lit, orange / white
Product dimensions: 32” W x 24-1/8” D x 15-1/2” H
Installation cut-out dimensions: 32-1/16” W x 19-11/16” D x 8-1/4” H
-
Designed for Propane & Natural Gas.
The griddle is factory set to burn liquid propane gas. A regulator is installed and leak tested, so all you have to do is connect to a propane tank. Plumbed installations are also possible for both propane and natural gas. If using natural gas, each burner must be converted using the included components.
HearthStone Outdoor Griddles must be located outdoors.
Locate the unit in a well-ventilated area.
The counter and supporting ledges or deck must be level and flat.
The enclosure should have ventilation holes to prevent gas build-up in the event of a leak.
Use the HearthStone Outdoor Build-in Liner for installation into a combustible enclosure.
Allow 24" from the sides and rear to combustible construction while in operation.
Please check your local codes.
-
Unique Features
1. 10mm Stainless Steel Griddle
2. Removable Stainless Steel Lid
3. Grease Drain
4. Grease Tray
5. Independent Zone Burners
6. 304 Stainless Steel Chassis
7. LED Burner Controls
8. LED On/Off Switch
9. Battery Access
